Picture | ES Part No. | Part No | Stock | Price | Datasheet | Pb Free | RoHS | Description | Type | Vendor |
1250-0025-6 | CP1003B | 6 | 29,117.50 | PB-Free | High Frequency AC/DC Current Probe, 100MHz, Range 20mA - 6Apk (6A)/50mA - 30Apk (30A), Maximum Conductor Diameter 5mm (Wire Grip), BNC Interface | Current Probe | MICSIG | |||
1303-0014-2 | Z219C | 0 | 10,000.00 | PB-Free | RoHS | WZ12C Clip-On Current Sensor, Adjustable 1 mA to 15A, 1mV/mA and 1 to 150A, 1mV/A, Clip Jaw Opening 15mm, Connector Cable Length 120 cm. | Current Probe | GOSSEN METRAWAT | ||
1250-0019-1 | CP1003 | 2 | 18,240.00 | PB-Free | RoHS | High Frequency AC/DC Current Probe, 100MHz, Range 20mA - 6Apk (6A)/50mA - 30Apk (30A), Compatibility Oscilloscopes with Micsig UPI Probe Interface | Current Probe | MICSIG | ||
0061-0367-5 | FLUKE I30 | 4 | 21,006.40 | PB-Free | RoHS | Hall Effect Technology AC/DC Current Clamp,Range: 30ADC/20ADC, for Accurate Non-Intrusive Current Measurement, Required 9V Alkaline Battery | Current Probe | FLUKE | ||
0061-0530-2 | FLUKE I2500-18 | 2 | 7,366.25 | PB-Free | RoHS | Flexible Current Probe 2500A, Expands the Measurement Range to 2500A(AC), Cable Length 1.8m, Loop Diameter 45cm | Current Probe | FLUKE | ||
1303-0011-6 | Z204A | 0 | 13,888.00 | PB-Free | RoHS | CP 1800, AC/DC Current Sensor Clamp with Voltage Output for Multimeters, AC and DC Current Measure max. 1800A, Resolution 100mA/500mA | Current Probe | GOSSEN METRAWAT | ||
0061-0112-0 | FLUKE 80I-110S | 1 | 35,893.60 | PB-Free | RoHS | AC/DC Current clamp,compatible with any Fluke ScopeMeter Test Tool,Current Range: 0.1 to 100ADC or 0.1 to 70AAC, | Current Probe | FLUKE | ||
0061-0381-5 | FLUKE I2000 FLEX | 2 | 17,652.00 | PB-Free | RoHS | AC Current Probe 20A,200A, 2000A Switch Selectable Max. Conductor Diameter 178mm Required 2xAA Battery | Current Probe | FLUKE | ||
0061-0480-7 | FLUKE I1A/10A-CLAMP-PQ4 | 1 | 24,068.40 | PB-Free | RoHS | Mini Current Clamp Sets for Power Quality Loggers 3-Phase+N,Current Range 0.025A to 10A Frequency Range 40Hz to 5KHz DC 11 | Current Probe | FLUKE | ||
1250-0006-2 | ACP1000 | 3 | 8,119.65 | PB-Free | RoHS | Oscilloscope AC Current Probe,Operating Frequency 10Hz-100kHz,Test Current Range 0.1A-1000A, Max. Primary Current 2000A (2s) | Current Probe | MICSIG | ||
0061-1557-2 | FLUKE 802ES/APAC | 3 | 19,867.20 | PB-Free | RoHS | Optional Accessories for Vibration Meter, Includes External Sensor/Extender/Magnet Base/M12 RF Connector Spring Cable Assembly | External Sensor for Vibration Meter | FLUKE | ||
0184-0015-1 | SEAWARD-388A688 | 0 | 3,600.00 | Fused Test Lead 1000V/15A for PV150 Installation Tester | Fuse Test Leads | SEAWARD | ||||
1250-0014-1 | DP10007 | 7 | 5,117.65 | PB-Free | RoHS | High Voltage Differential Probe 100MHz, Maximum Differential (DC+AC PeaK) 700V, Attenuation 10X or 100X, Input Cable 45cm, Output Cable 90cm | High Voltage Probes | MICSIG | ||
0061-0006-3 | FLUKE 80K-40 | 3 | 11,151.05 | PB-Free | RoHS | High Voltage Probe that allows a multimeter to measure up to 40,000V. Intended for low energy application only. | High Voltage Probes | FLUKE | ||
1250-0026-8 | MDP701 | 6 | 7,411.90 | PB-Free | RoHS | High Voltage Differential Probe MDP Series, 150MHz Max. Differential Voltage (DC+AC PeaK) 70V/700V, Attenuation 20X/200X, 5MHz Bandwidth Limit | High Voltage Probes | MICSIG |