| Picture | ES Part No. | Part No | Stock | Price | Datasheet | Pb Free | RoHS | Description | Type | Vendor |
| | | | | | | | | | |
 | 0061-0112-0 | FLUKE 80I-110S | 1 | 35,893.60 |  | PB-Free | RoHS | AC/DC Current clamp,compatible with any Fluke ScopeMeter Test Tool,Current Range: 0.1 to 100ADC or 0.1 to 70AAC, | Current Probe | FLUKE |
 | 1250-0025-6 | CP1003B | 6 | 28,718.50 | | PB-Free | | High Frequency AC/DC Current Probe, 100MHz, Range 20mA - 6Apk (6A)/50mA - 30Apk (30A), Maximum Conductor Diameter 5mm (Wire Grip), BNC Interface | Current Probe | MICSIG |
 | 0061-0480-7 | FLUKE I1A/10A-CLAMP-PQ4 | 1 | 24,068.40 | | PB-Free | RoHS | Mini Current Clamp Sets for Power Quality Loggers 3-Phase+N,Current Range 0.025A to 10A Frequency Range 40Hz to 5KHz DC 11 | Current Probe | FLUKE |
 | 0061-0367-5 | FLUKE I30 | 4 | 21,006.40 | | PB-Free | RoHS | Hall Effect Technology AC/DC Current Clamp,Range: 30ADC/20ADC, for Accurate Non-Intrusive Current Measurement, Required 9V Alkaline Battery | Current Probe | FLUKE |
 | 0061-1557-2 | FLUKE 802ES/APAC | 3 | 19,867.20 | | PB-Free | RoHS | Optional Accessories for Vibration Meter, Includes External Sensor/Extender/Magnet Base/M12 RF Connector Spring Cable Assembly | External Sensor for Vibration Meter | FLUKE |
 | 1303-0015-4 | Z591B | 0 | 19,800.00 | | PB-Free | RoHS | General Purpose Current Clamp with Current Output, Type: E-Clip 2, Rate Current 1000A, Ratio 1000:1, Output 1mA/A, Measuring Range 0.2A to 1200A. | Current Probe | GOSSEN METRAWAT |
 | 0061-0381-5 | FLUKE I2000 FLEX | 2 | 17,652.00 | | PB-Free | RoHS | AC Current Probe 20A,200A, 2000A Switch Selectable Max. Conductor Diameter 178mm Required 2xAA Battery | Current Probe | FLUKE |
 | 1250-0019-1 | CP1003 | 2 | 17,261.50 | | PB-Free | RoHS | High Frequency AC/DC Current Probe, 100MHz, Range 20mA - 6Apk (6A)/50mA - 30Apk (30A), Compatibility Oscilloscopes with Micsig UPI Probe Interface | Current Probe | MICSIG |
 | 1303-0011-6 | Z204A | 0 | 13,888.00 | | PB-Free | RoHS | CP 1800, AC/DC Current Sensor Clamp with Voltage Output for Multimeters, AC and DC Current Measure max. 1800A, Resolution 100mA/500mA | Current Probe | GOSSEN METRAWAT |
 | 0061-0127-9 | FLUKE 80PK-27 | 12 | 13,516.00 | | PB-Free | RoHS | Suregrip Industrial Surface Temperature Probe Type-K Thermocouple for Surface in Rugged Environment,Measurement Range:-127°C to 600°C | Temperature Probes | FLUKE |
 | 0061-0382-8 | FLUKE 80T-150UA | 1 | 12,232.54 | | PB-Free | RoHS | Universal Temperature Probe Output 1mV°C Measurement range: -50 to 150°C Compatible with Fluke DMMs | Temperature Probes | FLUKE |
 | 0206-0035-1 | PA0021 | 1 | 11,930.00 | | PB-Free | RoHS | Clamp Air Thermocouple, K Type, PTFE-Insulated Cable, Length 1.5m., Maximum Temperature 256°C, Accuracy ±1.1°C | Temperature Probes | DATAPAQ |
 | 0061-0006-3 | FLUKE 80K-40 | 3 | 11,151.05 | | PB-Free | RoHS | High Voltage Probe that allows a multimeter to measure up to 40,000V. Intended for low energy application only. | High Voltage Probes | FLUKE |
 | 1250-0011-5 | CP2100B | 3 | 10,830.00 | | PB-Free | RoHS | AC/DC Current Probes,Bandwidth DC-2.5MHz, Rise Time is less than or equal to 175ns,10A/100A, CAT III 300V CAT II 600V,Max. Conductor Dia. 13mm, | Current Probe | MICSIG |
.jpg) | 1303-0014-2 | Z219C | 0 | 10,000.00 | | PB-Free | RoHS | WZ12C Clip-On Current Sensor, Adjustable 1 mA to 15A, 1mV/mA and 1 to 150A, 1mV/A, Clip Jaw Opening 15mm, Connector Cable Length 120 cm. | Current Probe | GOSSEN METRAWAT |
My account
Cart
My wishlist
