| Picture | ES Part No. | Part No | Stock | Price | Datasheet | Pb Free | RoHS | Description | Type | Vendor |
| | | | | | | | | | |
 | 1303-0011-6 | Z204A | 0 | 13,888.00 |  | PB-Free | RoHS | CP 1800, AC/DC Current Sensor Clamp with Voltage Output for Multimeters, AC and DC Current Measure max. 1800A, Resolution 100mA/500mA | Current Probe | GOSSEN METRAWAT |
 | 1303-0005-1 | Z503D | 0 | 7,200.00 | | PB-Free | RoHS | SORTIMO L-BOXX GMC-I, Plastic System Case for Testers and Accessories, Outside Dimensions WxHxD: 450x255x355mm. | Bag,Cases,Holsters | GOSSEN METRAWAT |
 | 0184-0046-2 | SEAWARD-44B090 | 0 | 1,350.00 | | PB-Free | RoHS | Fused Test Leads with Alligator Clips,Black/Red Built in 500mA HBC Fuses,Length 1.2meter Probes Compliant with GS38 | Test Leads,Test Probes | SEAWARD |
 | 0853-0040-9 | HIOKI-DT4910 | 0 | 1,200.00 | | | | Thermocouples K Type, Tip Exposed Diameter 0.3mm,Length 80cm,-40°C to 260°C use with HIOKI-DT4212, DT-4211 | Temperature Probes | HIOKI |
 | 0061-0417-0 | FLUKE TL27 | 0 | 0.00 | | PB-Free | | Heavy Duty Test Lead Set, Digital Multimeter test lead with safety shrouded Heavy duty EPDM Insulation, Length 1.5m | Test Leads,Test Probes | FLUKE |
 | 0184-0015-1 | SEAWARD-388A688 | 0 | 3,600.00 | | | | Fused Test Lead 1000V/15A for PV150 Installation Tester | Fuse Test Leads | SEAWARD |
 | 1303-0015-4 | Z591B | 0 | 19,800.00 | | PB-Free | RoHS | General Purpose Current Clamp with Current Output, Type: E-Clip 2, Rate Current 1000A, Ratio 1000:1, Output 1mA/A, Measuring Range 0.2A to 1200A. | Current Probe | GOSSEN METRAWAT |
.jpg) | 1303-0014-2 | Z219C | 0 | 10,000.00 | | PB-Free | RoHS | WZ12C Clip-On Current Sensor, Adjustable 1 mA to 15A, 1mV/mA and 1 to 150A, 1mV/A, Clip Jaw Opening 15mm, Connector Cable Length 120 cm. | Current Probe | GOSSEN METRAWAT |
 | 1250-0022-1 | DP750-100 | 0 | 5,980.00 | | PB-Free | RoHS | High Voltage Differential Probe, 100MHz, Maximum Differential (DC+AC PeaK) 75V/750V, Attenuation 50X/500X, Micsig UPI Interface, USB (Adaptor) | High Voltage Probes | MICSIG |
 | 1303-0013-1 | Z502T | 0 | 8,400.00 | | PB-Free | RoHS | Z502T, Clamp Adapter for Connecting a Clamp Meter to the Test Plug, For Connecting a Second Current Clamp to the Test Instrument. | Clamp Adapter for Clamp Meter | GOSSEN METRAWAT |
.jpg) | 1303-0012-8 | Z501S | 0 | 6,900.00 | | | RoHS | PRO-RE, Adapter for Connecting 4 Wires for Earth Measurement, The Adapter is Only Suitable for Type MPRO and MXTRA from the PROFITEST MASTER | Adapter for Earth Measurement | GOSSEN METRAWAT |
 | 0206-0035-1 | PA0021 | 1 | 11,930.00 | | PB-Free | RoHS | Clamp Air Thermocouple, K Type, PTFE-Insulated Cable, Length 1.5m., Maximum Temperature 256°C, Accuracy ±1.1°C | Temperature Probes | DATAPAQ |
 | 0061-0382-8 | FLUKE 80T-150UA | 1 | 12,232.54 | | PB-Free | RoHS | Universal Temperature Probe Output 1mV°C Measurement range: -50 to 150°C Compatible with Fluke DMMs | Temperature Probes | FLUKE |
 | 0061-0401-8 | FLUKE PM9082/001 | 1 | 2,544.30 | | PB-Free | RoHS | Dual Banana Jack Female to Male BNC Adapter 4mm Banana Contact Adapter, for Fluke 190 and 90 Series Scopemeter | Test Leads,Test Probes | FLUKE |
 | 0061-1069-9 | FLUKE HC120 | 1 | 2,345.40 | | PB-Free | RoHS | Hook Clips,Set of 2 Red and Gray ,600Vrms Max. Wire Size 2.5mm.Max,for use with STL 120,VPS40 and TL75 Test Leads,Accepts wires up to 2.5 mm | Test Leads,Test Probes | FLUKE |
My account
Cart
My wishlist
